Textile Spray Adhesive by Siliconi
Takter 1
Takter1
Takter 1000
Takter 1000
Takter 4000
Image
Price List Tee Shirt Adhesive Aerosol

Takter 1 is a unique new aerosol product from Siliconi. Takter 1 is solvent free and non toxic, making it the perfect choice of the environmentally conscious textile printer. Takter 1 will take longer to tack but this time can be reduced by applying a small amount of heat. The adhesive will not transfer onto the printed fabric once it is completely dry. This adhesive is suitable for heavier fabrics due to its high tac. Flash cure (heat) resistance is excellent. The aerosol cans contain 500mls of adhesive. You clean the adhesive from pallets using warm water and washing up liquid.

Price List Tee Shirt Adhesive Aerosol

Takter 1000 is a traditional solvent based adhesive in an aerosol can for fabric hold down. It has a faster tack which allows multi applications of the adhesive without slowing a production run. The adhesive will not transfer onto the printed fabric once it is completely dry. This adhesive is suitable for light to medium fabric weights due to its lower tac. The aerosol cans contain 600mls of adhesive. You clean the adhesive from pallets using AQ 870 General Purpose Cleaner. If you do no want to use solvent to clean the pallets try our Pallet Pal.

Price List Tee Shirt Adhesive Aerosol

Takter 4000 is a longer lasting heat resistant solvent based adhesive in an aerosol can for fabric hold down. It has a faster tack which allows multi applications of the adhesive without slowing a production run. The adhesive will not transfer onto the printed fabric once it is completely dry. This adhesive is suitable for medium to heavy fabric weights due to its high tac. Flash cure (heat) resistance is excellent. The aerosol cans contain 600mls of adhesive. You clean the adhesive from pallets using AQ 870 General Purpose Cleaner. If you do no want to use solvent to clean the pallets try our Pallet Pal.

Aqua Stick (Bulk Adhesive)

The Aqua stick adhesive is a water based adhesive. It is a very economical adhesive that can be brushed or sprayed onto palettes or boards to hold down fabric. The Aqua Stick may be slower to tack up owing to its water content, you can shorten this time by applying heat to the adhesive. It can be reactivated with the application of water.

Aqua Stick Price List
Screen Mesh Adhesive
Can Of Liquid Bond

Liquid Bond is a clear 2 part rapid adhesive which offers high tensile strength, impact and solvent resistance. Once mixed, the pot life is three to five days depending on storage (ideally: stored in a sealed container to extend usage). Liquid bond is available in 1 US gallon containers. The adhesive has very good adhesion to aluminium. We recommend that a new aluminium frame is lightly ground and coated with liquid bond and left over night before stretching mesh onto the frame. The adhesive is applied using the yellow scraper supplied with the adhesive. Liquid Bond is very economical to use as there very little wastage of catalysed adhesive. There is also a Liquid Bond reducer available if the adhesive becomes too thick.

Price List Liquid Bond

Sales & Technical Support
Tel: +44 (0)20 8241 2050
E-mail: sales@screencoloursystems.co.uk

Manufacturing And Distribution Centre
Unit C
19 Deer Park Road
South Wimbledon
SW19 3UX

Administration & Accounts
Tel: +44 (0) 20 8287 1666
E-mail: accounts@screencoloursystems.co.uk