• Flash Cure Resistant

• Solvent Free

• Easily Washable With Water

• Does Not Transfer To Textile

• Easy To re-activate with water

• Not Toxic

• Suitable For Medium To Heavy Textiles

Takter 1 is a new aerosol product from Siliconi. Takter 1 is solvent free and non toxic making it the perfect choice of the environmentally friendly textile printer. Takter 1 will take longer to tack but this time can be reduced by applying a small amount of heat. The adhesive will not transfer onto the printed fabric once it is completely dry. This adhesive is suitable for heavier fabrics due to its high tac. Flash resistance is excellent, when t shirt printing on a carousel. The aerosol cans contain 500mls of adhesive. You clean the adhesive from pallets using warm water and washing up liquid.

• High Resistance To Flash Cures

• Extra Strong Adhesive At High Temperatures

• Fast Tack

• Long Lasting Tack

• Does Not Transfer Or Stain Textile

• Suitable For All Textiles Especially Heavy Fabrics

Takter 4000 is a solvent based adhesive in an aerosol can for fabric hold down. It has a faster tack which allows multi applications of the adhesive without slowing a production run. The adhesive will not transfer onto the printed fabric once it is completely dry. This adhesive is suitable for medium fto heavy fabric weights due to its higher tac. Flash resistance is excellent, when t shirt printing on a carousel. The aerosol cans contain 600mls of adhesive. You clean the adhesive from pallets using a general purpose cleaner like our AQ 870. If you do no want wash the pallets try our Pallet Pal.

• Resistant To Flash Cure

• Strong Adhesive

• Fast Tack

• Stays Tacky For Many Applications

• Reposition-able Adhesive

• Does Not Transfer Or Stain Textile

• Suitable For All Textiles

• Soluble In Water

• Apply Using Roller, Brush or Spray Gun

Liquid Bond is a clear 2 part rapid adhesive which offers high tensile strength, impact and solvent resistance. Once mixed, the pot life is three to five days depending on storage (ideally: stored in a sealed container to extend usage). Liquid bond is available in 1 US gallon containers. The adhesive has very good adhesion to aluminium. We recommend that a new aluminium frame is lightly ground and coated with liquid bond and left over night before stretching mesh onto the frame. The adhesive is applied using the yellow scraper supplied with the adhesive. Liquid Bond is very economical to use as there very little wastage of catalysed adhesive. There is also a Liquid Bond reducer available if the adhesive becomes too thick.